MK-II ECO Entry Level Plasma PCB Etching System
The MK-II ECO plasma etching system offers Plasma Etch's industry leading technological advantages at used system pricing. Features you can't get anywhere else, without breaking the bank. Our systems produce the most consistent, most uniform, and most reliable etch rates obtainable across an entire board's surface.
The MK-II ECO is an excellent choice for use in industrial clean room settings as a plasma etching system.
This entry level system works very well for treating conventional and flexible circuits. Flexile circuits may be placed on the horizontal shelves to prevent movement and shorting between the electrode and the chamber.
To purchase a MK-II ECO, please contact us at (775) 883-1336 or email: firstname.lastname@example.org.
Standard FeaturesElectrode Configuration
Single 24"Wx18"D electrode shelf allows standard board sizes to be treated.Generator
600 Watt, 13.56MHz Continuously Variable Power Supply with Automatic Matching NetworkGas Control
Two 0-100cc Rotometers control gas inputControl System
PC-Based Laptop Control Interface - Unlimited Recipe storage and advanced logging capabilities with unlimited history data.Vacuum Gauge
1-2000 mTVacuum Pump
28CFM 2-Stage Direct Drive Oil Pump (Oxygen Service – Krytox Charged)
- with -
Automatic Nitrogen Purge System
Oil Mist Eliminator
6061-T6 AluminumUnit Dimensions
36” wide x 26” deep x 30” tall
Proudly Made in the U.S.A.
Optional FeaturesFume Scrubber
Eliminate hazardous fumes/contaminants from the chamber/vacuum pump exhaust of the etching systemLow Frequency Option
The ECO version of the Mark II is available with a 1000 watt low frequency power supply
120/208 VAC, 50/60 Hz @ 30 Amps, 3 Phase, 5 WireCompressed Air Service
80-100PSI, 0.5CFMRegulated Process Gases